Introduction
Front Panel LED Status Indicator Functions
Initial Power Up, Calibration, and Registration (AC Power applied)
The following chart illustrates the sequence of steps and the corresponding appearance of the cable modem front panel LED status indicators during power up, calibration, and registration on the network when AC power is applied to the cable modem. Use this chart to troubleshoot the power up, calibration, and registration process of your cable modem.
Note: After the cable modem completes Step 7 (Registration Completed), the modem proceeds immediately to Normal Operations. See Normal Operations (AC Power applied).
Front Panel LED Status Indicators During Initial Power Up, Calibration, and Registration
Step | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | |
|
|
|
|
|
|
|
|
|
|
Front Panel | Power | Self | Downstream | Downstream | Ranging | Requesting | Registering | Registration | |
Indicator | Up | Test | Scan | Signal Lock |
| IP Address |
| Completed | |
1 | POWER | On | On | On | On | On | On | On | On |
2 | DS | Blinki | On | Blinking | On | On | On | On | On |
|
| ng |
|
|
|
|
|
|
|
3 | US | Blinki | On | Off | Off | Blinking | On | On | On |
|
| ng |
|
|
|
|
|
|
|
4 | ONLINE | Blinki | On | Off | Off | Off | Off | Blinking | On |
|
| ng |
|
|
|
|
|
|
|
5 | LINK | Off | On | On | On | On | On | On | On |
|
|
|
| or | or | or | or | or | or |
|
|
|
| Blinking | Blinking | Blinking | Blinking | Blinking | Blinking |
7 | TEL1 | Off | On | Off | Off | Off | Off | Off | Off |
8 | TEL2 | Off | On | Off | Off | Off | Off | Off | Off |
9 | BATTER | Off | On | Off | Off | Off | Off | Off | Off |
| Y |
|
|
|
|
|
|
|
|
| (optional |
|
|
|
|
|
|
|
|
| model |
|
|
|
|
|
|
|
|
| only) |
|
|
|
|
|
|
|
|
*The ONLINE LED is on whenever a PC is connected to the modem, and it blinks to indicate that data is being transferred. If the modem is used to provide telephone service only and is not connected to a PC, the ONLINE LED is off.
734348 Rev C | 45 |