Editing the Text
The SETUP MENU will be displayed when MENU is held down while the power is in “OFF” position. Turn the MULTI SELECTOR to select the O.TTL (Opening Title). You can enter the character at the flashing cursor position. The character selection method is described below.
1Enter the character to
•PRESET1: Alphabet input
Press the PRESET1 to switch the alphabet to upper case or lower case.
•PRESET2: Number, symbol (!”# etc.)
•PRESET3: Space, Deletion
•PRESET6: Katakana input (Katakana is a type of Japanese character.)
Press the PRESET6 to switch the katakana to upper case or lower case.
2After selecting the character, press the MULTI SELECTOR right. The cursor moves to the right, so you can edit the next character.
(Maximum number of characters for entry is 16.)
To choose and delete the charac- ter or text, choose the character with the cursor and then press the PRESET3 to delete.
3After character entry, press the MULTI SELECTOR in the center to register the text string.
If the cursor is positioned on the 16th character, press the MULTI SELECTOR to the right to register the whole text entered.
4After text entry is completed, turn the MULTI SELECTOR to select OPEN. The selected text string is registered as the Opening Screen. The customize mode ends and the registered text string is displayed for 6 sec.
New Message Display
The next time the ACC is switched on, the text edited by the user will be displayed.
NOTICE
To avoid draining the battery, do not leave the car audio on longer than necessary when the engine is not running.
31
