CU50
Service Manual
Door swing change
The door can be attached to open with hinges on the left or right. Retain all screws for
To change:
1. Remove top hinge pin from hinge.
2.Tilt top of door away from cabinet and lift door off bottom hinge.
3.Remove two screws and top hinge.
4.Remove plugs or screws from lower cabinet bracket
5.Attach top hinge to lower cabinet bracket using original screws.
6. Remove original bottom hinge.
7.Remove two plugs or screws from upper cabinet bracket.
8.Attach bottom hinge to upper cabinet bracket using the original screws.
9.Place the door on bottom hinge, tip up to slide under top hinge.
10.Insert hinge pin into top hinge and door.
11.Tighten hinge pin.
12.Replace screws or plugs into holes left by hinges.
13.Check action and swing of door.
March 2010
Page 6
