Description if bit is set to Bit Word | Seagate ST3750840ACE

Word	Description	Value

160–254	ATA-reserved	0000H
255	Integrity word	xxA5H

Note. Advanced Power Management (APM) and Automatic Acoustic Management (AAM) features are not supported

Note. See the bit descriptions below for words 63, 88, and 93 of the Identify Drive data:

Description (if bit is set to 1)

Bit	Word 63

0	Multiword DMA mode 0 is supported.

1	Multiword DMA mode 1 is supported.

2	Multiword DMA mode 2 is supported.

8	Multiword DMA mode 0 is currently active.

9	Multiword DMA mode 1 is currently active.

10	Multiword DMA mode 2 is currently active.

Bit	Word 88

0	Ultra DMA mode 0 is supported.

1	Ultra DMA mode 1 is supported.

2	Ultra DMA mode 2 is supported.

3	Ultra DMA mode 3 is supported.

4	Ultra DMA mode 4 is supported.

5	Ultra DMA mode 5 is supported.

8	Ultra DMA mode 0 is currently active.

9	Ultra DMA mode 1 is currently active.

10	Ultra DMA mode 2 is currently active.

11	Ultra DMA mode 3 is currently active.

12	Ultra DMA mode 4 is currently active.

13	Ultra DMA mode 5 is currently active.

Bit	Word 93

13	1 = 80-conductor cable detected, CBLID above VIH
	0 = 40-conductor cable detected, CBLID below VIL

32	DB35.3 Series PATA Product Manual, Rev. B

Image 38

Seagate ST3750840ACE manual Description if bit is set to Bit Word

Contents

DB35.3 Series Pata Page Contents DB35.3 Series Pata Product Manual, Rev. B List of Figures DB35.3 Series Pata Product Manual, Rev. B Introduction DB35.3 Series Pata Product Manual, Rev. B Drive specifications Specification summary table Drive specification ST3750840ACE ST3500830ACE ST3400820ACE DB35.3 Series Pata Product Manual, Rev. B Drive specification ST3320820ACE ST3300820ACE ST3250820ACE DB35.3 Series Pata Product Manual, Rev. B Formatted capacity Default logical geometryLBA mode Cylinders Read/write heads Sectors per track 16,383 Recording and interface technology Physical characteristicsDrive specification 750GB 500GB 400GB 320GB 300GB 250GB Start/stop times Power specificationsSeek time Standby mode DC power requirements Typical current profile Conducted noise Idle mode Power-management modesActive mode Sleep mode Environmental specifications Nonoperating shock Disc models ShockOperating shock 4 Disc models Idle CE seek profile AcousticsFluid Dynamic Bearing FDB motor acoustics Reliability Safety certificationElectromagnetic immunity Agency certification Australian C-Tick N176 Electromagnetic compatibilityKorean RRL FCC verification European Union Restriction of Hazardous Substances RoHS Environmental protectionCorrosive environment DB35.3 Series Pata Product Manual, Rev. B Configuring and mounting the drive Handling and static discharge precautions Breather filter hole precautions Breather filter hole location Drive as master with a non-ATA-compatible slave Jumper settingsMaster/slave configuration Cable-select option Drive mounting Ultra ATA/100 cable Mounting dimensions-top, side and end view DB35.3 Series Pata Product Manual, Rev. B ATA interface ATA interface signals and connector pinsPins and supported ATA signals Supported ATA commands Command name Command code in hex F4H Identify Device command Word Description Value Xx07H Description if bit is set to Bit Word Bit Word Set Features command 0CH 4 S.M.A.R.T. commands Code in features Register A.R.T. command Presales Support Seagate Technology support servicesInternet Technical Support Data Recovery Services Call Center Toll-free Direct dial Warranty ServiceData Recovery Services Authorized Service Centers Index Page TMR DB35.3 Series Pata Product Manual, Rev. B Page Seagate Technology LLC