4.0Performance characteristics
This section provides detailed information concerning
4.1Internal drive characteristics
| ST973451FC | ST936751FC |
|
Drive capacity | 73.4 | 36.2 | Gbytes (formatted, rounded off value) |
Read/write data heads | 4 | 2 |
|
Tracks per surface (total) | 42,554 | 42,554 | Tracks (user accessible) |
Tracks per inch | 150 | 150 | kTPI (average) |
Peak bits per inch | 861.81 | 861.81 | kBPI |
Areal Density | 130.58 | 130.58 | Gbit/in2 |
Internal data rate | 957.51 to 1,282.08 | 957.51 to 1,282.08 | Mbits/sec (variable with zone) |
Sustained data transer rate | Mbytes/sec (variable with zone) | ||
Disc rotation speed | 15k | 15k | revolutions/min (RPM) |
Avg rotational latency | 2.0 | 2.0 | msec |
4.2Seek performance characteristics
See Section 9.5,
4.2.1Access time
Not Including controller overhead1, 2 (msec)
|
| Read | Write |
Average | Typical3,4 | 2.6 | 3.1 |
Single track | Typical3,4 | 0.2 | 0.4 |
Full stroke | Typical3,4 | 4.9 | 5.5 |
1.Execution time measured from receipt of the FCP Command to the FCP Response.
2.Assumes no errors and no sector has been relocated.
3.Typical access times are measured under nominal conditions of temperature, volt- age, and horizontal orientation as measured on a representative sample of drives.
4.Access to data = access time + latency time.
Savvio 15K.1 FC Product Manual, Rev. B | 11 |