Seagate STBD3000100, STBD2000101, ST1000DM003, ST2000DM001, ST1500DM003 manual Drive Specifications

Drive Specifications			www.seagate.com
Table 1 Drive specifications summary for 3TB, 2TB, 1.5TB, 1TB and 750GB models (continued)
Drive Specification*	ST3000DM001;	ST2000DM001;	ST1000DM003;
	ST2000DM001	ST1500DM003	ST750DM003
Standby to ready (max)	<17.0s	<17.0s	<10.0s
Average seek, read (typical)	<8.5ms typical	<8.5ms (read)	<8.5ms (read)
Average seek, write (typical)	<9.5ms typical	<9.5ms (write)	<9.5ms (write)
Startup current 12V	2.0A or 2.8A	2.0A or 2.8A	2.0A
Voltage tolerance (including	5V: ±5%	5V: ±5%	5V: ±5%
noise)	12V: +10% / -7.5%	12V: +10% / -7.5%	12V: +10% / -7.5%
Ambient temperature	0° to 60°C (operating)	0° to 60°C (operating)	0° to 60°C (operating)
	–40° to 70°C (non-operating)	–40° to 70°C (non-operating)	–40° to 70°C (non-operating)
Temperature gradient	20°C per hour max (operating)	20°C per hour max (operating)	20°C per hour max (operating)
	30°C per hour max	30°C per hour max	30°C per hour max
	(non-operating)	(non-operating)	(non-operating)
Relative humidity	5% to 95% (operating)	5% to 95% (operating)	5% to 95% (operating)
	5% to 95% (non-operating)	5% to 95% (non-operating)	5% to 95% (non-operating)
Relative humidity gradient	30% per hour	30% per hour	30% per hour
(max)
Wet bulb temperature (max)	37.7°C max (operating)	37.7°C (operating)	37.7°C max (operating)
	40.0°C max (non-operating)	40.0°C (non-operating)	40.0°C max (non-operating)
Altitude, operating	–304.8m to 3048m	–304.8m to 3048m	–304.8m to 3048m
	(–1000 ft to 10,000+ ft)	(–1000 ft to 10,000+ ft)	(–1000 ft to 10,000+ ft)
Altitude, non-operating	–304.8m to 12,192m	–304.8m to 12,192m	–304.8m to 12,192m
(below mean sea level, max)	(–1000 ft to 40,000+ ft)	(–1000 ft to 40,000+ ft)	(–1000 ft to 40,000+ ft)
Operational shock (max)	80 Gs at 2ms	80 Gs at 2ms	80 Gs at 2ms
Non-operational shock (max)	300 Gs at 2ms	300 Gs at 2ms	350 Gs at 2ms
Vibration, operating	2Hz to 22Hz: 0.25 Gs, Limited	2Hz to 22Hz: 0.25 Gs, Limited	2Hz to 22Hz: 0.25 Gs, Limited
	displacement	displacement	displacement
	22Hz to 350Hz: 0.50 Gs	22Hz to 350Hz: 0.50 Gs	22Hz to 350Hz: 0.50 Gs
	350Hz to 500Hz: 0.25 Gs	350Hz to 500Hz: 0.25 Gs	350Hz to 500Hz: 0.25 Gs
Vibration, non-operating	5Hz to 22Hz: 3.0 Gs	5Hz to 22Hz: 3.0 Gs	5Hz to 22Hz: 3.0 Gs
	22Hz to 350Hz: 3.0 Gs	22Hz to 350Hz: 3.0 Gs	22Hz to 350Hz: 3.0 Gs
	350Hz to 500Hz: 3.0 Gs	350Hz to 500Hz: 3.0 Gs	350Hz to 500Hz: 3.0 Gs
Drive acoustics, sound power
	ST3000DM001;	ST2000DM001;	ST1000DM003;
	ST2000DM001	ST1500DM003	ST750DM003
Idle***	2.4 bels (typical)	2.4 bels (typical)	2.2 bels (typical)
	2.6 bels (max)	2.6 bels (max)	2.4 bels (max)
Seek	2.6 bels (typical)	2.6 bels (typical)	2.4 bels (typical)
	2.7 bels (max)	2.7 bels (max)	2.5 bels (max)
Non-recoverable read errors	1 per 1014 bits read	1 per 1014 bits read	1 per 1014 bits read
Rated workload	Average rate of <55TB/year. The MTBF specification for the drive assumes the I/O workload does not
	exceed the average annualized workload rate limit of 55TB/year. Workloads exceeding the annualized
	rate may degrade the drive MTBF and impact product reliability. The average annualized workload rate
	limit is in units of TB per year, or TB per 8760 power-on hours. Workload rate limit = TB transferred ×
	(8760/recorded power-on hours).
Warranty	To determine the warranty for a specific drive, use a web browser to access the following web page:
	support.seagate.com/customer/warranty_validation.jsp
	From this page, click on the “Verify Your Warranty” link. You will be asked to provide the drive serial
	number, model number (or part number) and country of purchase. The system will display the warranty
	information for your drive.
Load/Unload cycles (25°C,	300,000	300,000	300,000
50% rel. humidity)
Supports Hotplug operation	Yes	Yes	Yes
per the Serial ATA Revision 3.0
specification

*All specifications above are based on native configurations.

**One GB equals one billion bytes and 1TB equals one trillion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting.

***During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels.

12 Barracuda SATA Product Manual, Rev. G