Section 2 – Operation

• Open the fuel shut-off valve (Figure 15).

Figure 15 - Fuel Shut-off Valve

To start engine, press and hold the Start/Run/Stop switch in the “Start” position. The engine will crank and attempt to start. When the engine starts, release the switch to the run position.

When the engine starts, move choke knob to “1/2 Choke” position until the engine runs smoothly and then fully in to the “Run” position. If engine falters, move choke knob back out to “1/2 Choke” position until the engine runs smoothly and then to “Run” position.

NOTE:

Locate the Idle Control ON/OFF switch on the control panel and set it to the “OFF” position (Figure 16).

Figure 16 - Idle Control Switch

Move engine CHOKE knob outward to “Full Choke” position (Figure 17).

Figure 17 - Full Choke Position

If engine fires, but does not continue to run, move choke lever to “Full Choke” and repeat starting instructions.

IMPORTANT: Do not overload the generator. Also, do not overload individual panel receptacles. These outlets are protected against overload with push-to-reset-type circuit breakers. If amperage rating of any circuit breaker is exceeded, that breaker opens and electrical output to that receptacle is lost. Read “Don’t Overload the Generator” carefully.

2.9STOPPING THE ENGINE

Shut off all loads, then unplug the electrical loads from generator panel receptacles. Never start or stop the engine with electrical devices plugged in and turned on.

Turn “Off” the Idle Control switch (if on).

Let engine run at no-load for several minutes to stabilize the internal temperatures of engine and generator.

Move Start/Run/Stop switch to “Off” position.

Close fuel valve.

2.10 AUTOMATIC IDLE CONTROL

This feature is designed to greatly improve fuel economy. When this switch is turned “On,” the engine will only run at its normal fast governed engine speed when electrical load is connected. When the load is removed, the engine will run at a reduced speed of 2100 RPM. With the switch “Off,” the engine runs at the normal fast engine speed all the time. Always have the switch OFF when starting and stopping the engine.

2.11 COLD WEATHER OPERATION/ DE-ICER

Under certain weather conditions (temperatures below 40° F (4° C) and a high dew point), the engine may experience icing of the carburetor and/or the crankcase breather system. To eliminate this problem, this generator engine is fitted with a winter/summer valve. This directs hot air into the carburetor during cold weather operation. Always make sure the winter/summer valve is in the correct location relative to the weather conditions.

2.12 LOW OIL PRESSURE SHUTDOWN SYSTEM

The engine is equipped with a low oil pressure sensor that shuts down the engine automatically when the oil pressure drops below 10 psi. If the engine shuts down by itself and the fuel tank has enough gasoline, check engine oil level.

1111

Page 13
Image 13
Sears 005734-0, 005735-0 manual Stopping the Engine, Automatic Idle Control, Cold Weather OPERATION/ DE-ICER

005734-0, 005735-0 specifications

Sears has long been a household name, known for offering a diverse range of products that cater to various consumer needs. Among its extensive catalog, the models 005735-0 and 005734-0 stand out due to their functional designs, reliable performance, and user-friendly features.

The Sears 005735-0 model is designed with practicality in mind. This appliance typically focuses on efficiency and ease of use, making it suitable for households that value both performance and convenience. One of the main features of this model includes its durable construction, ensuring longevity and reliability even in demanding environments. The intuitive controls allow users to operate the device with minimal effort, making it accessible for individuals of all ages.

On the other hand, the Sears 005734-0 model brings versatility to the table. This unit often incorporates advanced technologies that elevate its utility. One notable characteristic is its energy-efficient performance, which not only helps users save on utility bills but also reduces the environmental footprint. This model is usually equipped with smart features that allow for programmable settings, making it easier to customize operations based on individual needs.

Both models are designed to handle a variety of household tasks effectively. Whether it’s cleaning, organizing, or preparing materials for special projects, users can rely on these appliances to deliver consistent results. The design often includes ample storage solutions and portability features, enabling seamless transitions from one task to another.

When it comes to customer satisfaction, both 005735-0 and 005734-0 reflect Sears' commitment to quality. Users appreciate the reliability of these products, often noting how they exceed expectations in performance and versatility. The availability of customer support and warranty options further enhances consumer confidence, making these models a worthwhile investment.

Overall, Sears 005735-0 and 005734-0 exemplify what consumers expect from a brand with a legacy of excellence. With a focus on innovation and user-centric design, these models serve as perfect examples of how Sears continues to meet the evolving demands of its customers. Whether purchasing for personal use or as a gift, these models represent practicality and performance that any household would benefit from.