Section 1 – General Information

1.1UNPACKING

•Set the palleted carton on a rigid flat surface.

•Remove staples along bottom of carton that fasten carton to pallet. Open carton from top.

•Remove all packaging material.

•Remove separate accessory box.

•Lift carton off the generator.

•Remove generator from shipping pallet by removing bolts through the shipping brackets (Figure 1).

1.2ASSEMBLY

The generator requires some assembly prior to using it. If problems arise when assembling the generator, please call the Generator Helpline at 1-888-436-3722.

1.2.1 ASSEMBLING THE WHEEL KIT

The wheel kit is designed to greatly improve the portability of the generator. A socket wrench with a 9/16” socket, a 1/2” socket, a 1/2” wrench and a pair of pliers are the tools that will be needed for assembly of the wheel kit.

Figure 1 - Bracket Removal

Shipping

Bracket (x4)

1.1.1 ACCESSORY BOX

Check all contents. If any parts are missing or damaged locate an authorized dealer at 1-888-436-3722.

Contents include:

•

Wheel Axle

•

Bolt-on tubular handle

•

2

– Washers

•

2

– Pneumatic Wheels

• 2 – Wheel Spacers

•

2

– Axle Bracket Assemblies

• 2

– Cotter Pins

•

Bolt-on Foot

• 2

– Spark Plugs

•

Spark Plug Wrench

•

Air Filter

•

Oil Filter

•

Pre-cleaner

•

Battery Charge Cable

• 6

– Carriage Bolts, Washers, Nuts

 

 

NOTE:

The wheel kit is not intended for over-the-road use.

•Refer to Figure 2 and install the wheel kit as follows:

•Place the generator on a hard flat surface.

•Stand at the engine end of the unit and gently tilt the generator forward, high enough to place wooden blocks beneath the cradle. This will allow space to install the wheel assemblies.

•Attach an axle bracket assembly with attached sleeve to either side of the frame. Ensure the sleeve faces outward.

•Slide the axle through the sleeves on the axle brackets.

•Slide one wheel with flat washer to the outside and a spacer to the inside onto each end of the axle. Make sure the air inflation valve on the wheel is facing outward.

•Insert retaining pins and using pliers, bend out the ends to prevent the pins from falling out of the axle. Remove the wooden blocks.

1.2.2 ASSEMBLING THE HANDLE

•Attach the handle by aligning one side of the handle on the cradle, then spread the handle around the cradle and let it spring into place. Secure the handle to the frame using the 5/16’ hex head bolts provided. Check each fastener to ensure that it is secure.

•Using the handle, lift the unit high enough to place wooden blocks under the unit. Attach the front support foot to the underside of the cradle using the 3/8” carriage bolts provided.

•Remove the shipping brackets from the cradle, if it has not already been done.

4

Page 5 Page 7
Page 6
Image 6
Sears 005735-0, 005734-0 manual Unpacking, Assembly, Assembling the Wheel KIT, Accessory BOX, Assembling the Handle
Page 5 Page 7

005734-0, 005735-0 specifications

Sears has long been a household name, known for offering a diverse range of products that cater to various consumer needs. Among its extensive catalog, the models 005735-0 and 005734-0 stand out due to their functional designs, reliable performance, and user-friendly features.

The Sears 005735-0 model is designed with practicality in mind. This appliance typically focuses on efficiency and ease of use, making it suitable for households that value both performance and convenience. One of the main features of this model includes its durable construction, ensuring longevity and reliability even in demanding environments. The intuitive controls allow users to operate the device with minimal effort, making it accessible for individuals of all ages.

On the other hand, the Sears 005734-0 model brings versatility to the table. This unit often incorporates advanced technologies that elevate its utility. One notable characteristic is its energy-efficient performance, which not only helps users save on utility bills but also reduces the environmental footprint. This model is usually equipped with smart features that allow for programmable settings, making it easier to customize operations based on individual needs.

Both models are designed to handle a variety of household tasks effectively. Whether it’s cleaning, organizing, or preparing materials for special projects, users can rely on these appliances to deliver consistent results. The design often includes ample storage solutions and portability features, enabling seamless transitions from one task to another.

When it comes to customer satisfaction, both 005735-0 and 005734-0 reflect Sears' commitment to quality. Users appreciate the reliability of these products, often noting how they exceed expectations in performance and versatility. The availability of customer support and warranty options further enhances consumer confidence, making these models a worthwhile investment.

Overall, Sears 005735-0 and 005734-0 exemplify what consumers expect from a brand with a legacy of excellence. With a focus on innovation and user-centric design, these models serve as perfect examples of how Sears continues to meet the evolving demands of its customers. Whether purchasing for personal use or as a gift, these models represent practicality and performance that any household would benefit from.
Top Page Image Contents