H.STORAGE
When your ,saw is to be stored for over 30 days always:
1, Drain fuel tank in asafe manner (see Impor- tant Points, page9.)
. Start Engine and allow to run at an idle speed until the engine stops,
NOTE: This will remove most of the fuel from the fuel system.
dling thechain. The chain is sharp and can cut you even when it is not moving.
!. MAINTENANCE ACCESSORIES
3.
4.
5.
.
.
8.
Drain oil i_nk.
Remove, Clean, and dry the bar and chain.
Store the Chain in a container filled with oil to prevent rust.
Apply a coating of oil to the entire surface of
the bar and wrap it in heavy paper, cloth or plastic.
Clean the outside surfaces of the engine. Store the saw in a dryplace, out of the reach of children and away from wherefuet vapors can reach open flames from hot water heaters, furnaces, etc.
1
2
Key | Pad |
|
|
No. | No. | Catalog No. | Description |
1 | 55046 |
| File Guide |
2 |
| ||
|
| ||
|
| Depth Gauge Tool |
Part |
|
NO. | Catalog No. |
30073 | |
| |
30114 | |
| |
| |
| |
44209 | |
44246 |
|
51262 | |
51241 |
Description
Spark
Bar and Chain Lubricant (gallon size) Bar and Chain Lubricant (quart size)
Xtra GUARD ® Chain- Oregon® (72SG
Power Sharp® Chain - Oregon ® (76
24