Sears 385.16631 owner manual SECTION .PREPARE YOUR MACHINE FOR SEWING Foot Control Use

Power supply plug

supply

SECTION .PREPARE YOUR MACHINE FOR SEWING

Foot Control Use

Plug connector

Power	Machine plug
switch

NOTE: Before inserting the plug into your

machine, be sure the power switch is OFF.

1.Check your outlet to be sure it is a 110 to 120 Volt AC outlet.

2.Insert the machine plug into the three-prong

plug connector, as shown. It will only fit one way.

3.Insert the power supply plug into the wall outlet.

Power switch

4.Push the light and power switch to turn on the power and sewing light.

SAFETY FEATU RE:

Your machine will not operate unless the

light/power switch is turned on. If you are

interrupted or stop sewing, turn off the

light/power switch to prevent injury to children.

¢

/

Foot coR'_rol

The foot control regulates the speed at which you sew.

To increase speed, gently press down with the bail of your foot.

To decrease speed, release your foot pressure

slightly.

NOTE: The foot control is sensitive and

will increase or decrease your

sewing speed immediately. Practice on a scrap of fabric to regulate your sewing speed to your taste and needs.