Sears 385.16631 owner manual Changing the Needle Plate

	Regular		Rolled	hemming
	(for	normal	(for	rolled	herrlqfing
	sewing)		picot	edging	and
	on the reverse	"S"	narrow	hemming)
Stamp				"R"
side of	the plate

*Select the needle plate for your sewing need.

*Your overlock is shipped with the regular needle plate in place.

For your Safety:

When you change the needle plate, make sure that the machine is disconnected from the power supply.

Changing the Needle Plate

Tighten

Loosen

Needle pl_ set screw

(_ Turn the hand wheel toward you until the

needle comes above the needle plate, Then remove the presser foot,

(_ Open the side and looper covers. (Refer to page 6.)

(_ Set the upper knife to down position. ( Refer to page 29.)

Remove the needle plate set screw, and lift the needle plate.

(_) Attach the needle plate you require with the needle plate set screw,

(_) Bring the upper knife to up position. (Refer to page 29.)

(_ Close the looper and side covers.

Attach the presser foot.

3O