Sears 385.16631 owner manual PREPARE YOUR MACHINE FORSEWgNG

SECTION 2. PREPARE YOUR MACHINE FORSEWgNG

Left needle tnreaa tension dial

\N;

ever thread

Thread take-uu _ guide

9®

(_ Insert the thread between tension discs from the right. Then pull both sides of thread.

(_) Turn the hand wheel toward you to bring needle bar to its highest position, then pass the

thread through thread take-up lever thread gu ide.

Needle thread ...

guide

Needle bar thread guic

\

b®db

®Pass the thread through needle thread guide sliding the thread from right to left.

Pass through needle bar thread guide from left to right.

(_ Thread the left needle from the front to tne back and pull the thread about 10 cm (4") from the eye of the needle to the back under the foot.

NOTE: Needle may be easier to thread if you remove presser foot (See page 27) and lower the knife (See page 29).

Gently pull all four thread enes towards back of machine.

Replace presser foot (See page 27).

Run threads under presser foot.

--Return knife to uu position (See page 29). Close side and looper covers.

Turf hand wheel toward you to chain off three or four stitches.

17