Sears 385.16631 owner manual @ / @ @, Looper ,k.%

SECTION 2. PREPARE YOUR MACHINE FOR SEWING

	\
LOWel
!oooer	thread gui
thread
guide (4)
Lower
ooper
tnreaa

guide (1

¢	Lower
	looper	threat	Lower	oopef	Loooar	threac
	tension	dial

Lowe_

looper _,'k.%.-'_

thread _X,_ "_'_._

{side(5) Slb_ _.-#_ Looper

Th,ead "\ I__J_X

Looper_.

threader_

Thread ._-_

[r]r_aoer Loooer

Lower OODer _

Tweezers

f_ Insert the thread between tension

discs from the right. Then pull both sides of the thread firmly between tension discs.

(_ Pass the thread through lower looper thread guide (1).

6_ (_ (_ tnread guide (3)take-up lever uower_

(_ Pass the thread through ower looper thread guide (2).

(_) Pass the thread through the looper thread take-up lever (lower).

(_) Pass the thread through lower looper thread guides (3) and {4).

1_ Turn the _and wheel toward ,_

you until the lower looper comes to the right, and pass the

threader through hole on lower looper thread guide (5).

Hook the end of threao on the

threader. (See Note.}

Pull !_e threader to aass the

thread through the hole of lower looper thread guide (5). Remove the thread frorr the threader, and draw the thread

through the hole on lower looper to the back 10 cm (4") or more with a pair of tweezers.

Thread

NOTE: How to Thread Woolly Nylon/Polyester Thread.

Lower ooDer

@ / @ @

Z

/

/

Tension d_ses

*Make sure that the thread is between the tension discs.

NOTE: If you remove the needle olate, the threading points of lower looper are easier to see.

In this case, make sure the thread is not caught by the needle plate when replacing the plate after threading.

©rdinar.	WoolIv n', on!pb _ ester -qreao
[rlreao

*Shown above is one of the easiest ways to pass woolly nylon! polyester thread through the needle.

* Use the same method for the upper Iooer, 11