Sears 385. 17526 owner manual Zigzag toot

SECTION 2. PREPARE THE MACHINE FOR SEWING

Know What the Presser Feet Will Do (Continued)

g Change the Presser Foot (Continued)

To Snap On

,-.._

Groove _n_

_ ..... J

To Snap On the Presser Foot:

1.Place the presser loot so the horizontal pin on the loot lies just under the groove of the toot holder.

2.Lower the presser toot holder to lock the presser foot in place.

NOTE: If you do not hear the presser toot snap in place, press down on the presser toot holder firmly until you hear the snap.

•Presser Foot Types Zigzag Foot

f

A: Zigzag toot

Use this foot lor both straight and zigzag stitching.

Uses: Zigzag stitching (see page 3_, Bar tacking (see page 3_, Button sewing (see page 4_, Overcasting stitch (see page 4_, Blind hemming (see page 4_2.), Lace work (se page 4_, Three-step zigzag (see page 4__, Box stitching {see page 4__, Two-point shell stitching

(see page 4_.6_), Fagoting (see page 46),

Two-point box stitch (see page 4_Z), Overedging stitch (see page 4_Z), Rick-rack stretch (see page __), Overcast stretch (see page 50_, Smoking (see page 5_.03,

Elastic stretch (see page 5_.!_), Stretch patching (see page 5_, Herring bone stretch (see page 53t, Decorative stretch patterns

(see page _._.),

Twin needle stretching (see page 61_.

Straight Foot

H: Straight toot

Use this exclusively for straight stitching using center needle position only.

Uses: Straight stitching (see page 3_!), Topstitching (see page 3_, Straight stretch (see page 4__.

t2