1.Unplug the machine and remove the presser foot and needle.
2.Remove the bobbin face cover plate.
3.Remove the screw on the teft side
of the needle w_th the large screw
driver.
4.Remove the needle plate.
6, Use the lint brush to clean the feed dogs, hook race and bobbin
holder. Also use a soft, dry c1oth,
Open face cover plate and oil points as shown below at least once a year. On or two drops of oil is sufficient.
Remove excess oil, otherwise it may stain fabrics,
5.Take out the bobbin. Lift up the bobbin holder and remove _t,
In case machine is not used for an
extended time, oll it before sewing. Use good quality sewing machine oil.
No other oiling is required
Above points are only area which require oiling on this machine,
Line up the red marks and place the bobbin holder so the knob fits next to the stopper in the hook race, as shown above.
64
