Sew a Button
Set the | Machine |
|
|
| Stitch | w=dth control | |
| 0 |
| _ |
Top thread tension |
|
|
|
control 2 to 6 |
| co | control |
| Stitch | length | |
| Any number | inot | |
._ | necessary;o | adjust) | |
Stretch Stitch
A:Zigzag foot Darning plate
Use the darning plate for button sewing (see page 32).
1.Match the center of the button holes to the center of the slot on the presser foot,
2.Adjust the stitch width so that needle wilt drop in each hole.
3.Lower the foot to hotd the button in place.
Turn the hand wheel by hand so that needle will enter either hole of the button.
4.Stitch several times.
To strengthen the shank, cut the
threads leaving a 8" tail, Bring the
needle thread down through the hole in the button and wind it around the
shank.
Draw the thread to the bottom side
and knot.
39
