Sears 385. 1884180 owner manual To Snap On, PresserFoot Types, Zigzag Foot

To Snap On

G

To Snap On the Presser Foot;

1.Place the presser foot so the hori- zontal pin on the foot lies just under the groove of the foot holder.

2.Lower the presser foot holder to lock the presser foot in place.

NOTE: If you do not hear the presser foot snap in place, press down on the presser foot holder firmly until you hear the snap.

•PresserFoot Types

Zigzag Foot

f

%A: Zigzag foot

Use this foot for both straight and zigzag stitching_

Uses: Zigzag stitching {see page 35), Bar tackir_g (see page 37), Button sewing (see page 39), Rick-rack stretch (see page 40_1, Three-step zigzag (see page 41}, Overcast stretch (see page 42), Lace work (see page 44),

Two-point shell stitching (see page 54),

Smocking (see page 55),

Stretch patching {see page 555),

Fagoting (see page 56),

Herring bone stretch tsee page 56),

Elastic stretch (see page 5_7),

Box stitching (see page 57),

Two-point box stitching (see page 58), Overedging stitch (see page 58), Decorative stretch stitching

(see page 59).

Straight Feot

H: Straight foot

Use this foot exclusively for straight stitching using center needle position only,

Uses: Straight stitching lsee page 31), Topstitching {see page 32), Straight stretch (see page 34), Quilting (see page 33),

1t