The Presser feet are an important feature of this machine. You need to know what each foot does in order to use them effectively.
Your presser foot is held in place by a Foot Holder. Each presser foot merely snaps on the foot holder, which is seldom removed.
If you need to remove or attach the foot holder, here is what you do:
To Remove: | To Attach: |
Foot _ | ! |
holder |
|
SCrew |
|
o Changethe Presser Foot
Use the correct presser foot for the stitch you wish to sew. Consult the Stitch Pattern Chart and the detailed directions for sewing with the various presser feet,
To Snap Off:
To Remove:
Turn the screw toward the back of
the machine. Use the large screw driver,
To Attach:
1.Match the hole in the foot holder with the threaded hole in the presser bar.
2.Fit the foot holder screw into the hole.
3.Tighten the screw by turning it toward you.
To Snap Off the Presser Foot:
1.Raise the needle bar to _ts hlghest position by turning the hand wheel toward you.
2.Raise the presser foot.
3.Press the
10
