Remove all pecking material and accessories. Examine the oven for any damage such as dents or broken door. Do not install if oven is damaged.
1.Select a level surface that provides enough
open space (see illustration at right) for the inlet and/or outlet vents.
•Leave a minimum clearance of 3 inches (7.5 cm) above the oven.
•Do not remove the legs from the bottom of the oven.
•Blocking the inlet and/or outlet openings can damage the oven.
•Do not install oven over a range, cooktop or other
2.Plug your oven into a standard
is at least 15 amperes and that your microwave oven is the only appliance on the circuit.
To install the oven under the cabinet, optional mounting kit, Stock No.
Contact your Sears store.
On installation of mounting kit, 1 inch (2.5 cm) must be allowed on both sides of oven and
4 inches (10 cm) must be allowed under bottom of oven.
OPEN
A minimum clearance of 3 inches (7.5 cm) is required between the oven and any adjacent wall. One side must be open.
NOTE:
This unit is not designed for 50 Hz or any
circuit other than a
This oven is designed for countertop or
cabinet or wall will damage the product and void the warranty.
5
