OPERATION

NOTE: When adding oil to the engine crankcase in the future, use only high quality detergent oil rated with API service classification SF, SG or SH rated SAE 30 weight. Use no special additives. Select the oil'sviscosity grade according to your expected operating temperature.

Although mutti-viscosityoils (5W30, 10W30, etc.) improve starting in cold weather, these multi-viscosityoils will result in increased oil consumption when used above 32°F.

Check your engine oil level more frequently to avoid possi- ble damage from running low on oiloOil sump capacity is 20 ounces.

•Position pressure washer so engine is level.

. Clean area around oil fill plug and remove oil fill plug

(Fig. 18)_.

I_G. 18

°Fill oil crankcase to point of overflowing. Oil sump capacity is 20 U.S_ ounces..

IMPORTANT: THE MOTOR OIL INCLUDED IN THE CARTON CONTAINS 27 OUNCES. IT IS NOT NECES- SARY TO USE THE ENTIRE AMOUNT OF OIL IN THE OIL CONTAINER°

GAS

A WARNING: NEVER FILL FUEL TANK INDOORS. NEVER RLL FUEL TANK WHEN ENGINE IS RUN-

NING OR HOT. DO NOT SMOKE WHEN FILLING FUEL TANK.

WARNING: NEVER FILL FUEL TANK COM- a, PLETELY FIJLL FILL TANK TO ABOUT 1/2" BE-

LOWTHE BOTTOM OF FILLER NECKTO PROVIDE SPACE FOR FUEL EXPANSION. WIPE AWAY ANY FUEL SPILLAGE FROM ENGINE AND EQUIPMENT

BEFORE STARTING.

The manufacturer recommends fresh, clean, unleaded regular automotive gasoline with a minimum of 77 octane (Leaded regular grade is an acceptable substitute). Tank capacity is 2 U,S. quarts.

*Use clean fuel and store in approved, clean covered containers_ Use clean fill funnets_ Never use "stale" asoline left over from last season or gasoline stored

r long periods.

IMPORTANT: IT IS IMPORTANT TO PREVENT GUM DEPOSITS FROM FORMING IN ESSENTIAL FUEL SYS- TEM PARTS SUCH AS THE CARBURETOR, FUEL FIL-

TER, FUEL HOSE OR TANK DURING STORAGE. ALSO, EXPERIENCE INDICATES THAT ALCOHOL-BLENDED

FUELS (CALLED GASOHOL OR USING ETHANOL OR METHANOL) CAN ATTRACT MOISTURE WHICH LEADS TO SEPARATION AND FORMATION OF ACIDS DURING STORAGE. ACIDIC GAS CAN DAMAGE THE FUEL SYS- TEM OF AN ENGINE WHILE IN STORAGE. TO AVOID

ENGINE PROBLEMS, THE FUEL SYSTEM SHOULD BE EMPTIED BEFORE STORAGE OF 30 DAYS OR LONGER. SEE "STORAGE" ON PAGE 17. NEVER USE ENGINE OR CARBURETOR CLEANER PRODUCTS IN THE FUEL TANK OR PERMANENT DAMAGE MAY OC- CUR.

,,Clean area around fuel fill cap, remove cap.

. Add "UNLEADED" regular gasoline, slowly, to fuel tank.

*Install fuel cap and wipe up any spilled gasoline.

TO TURN ON WASHER

*Attach one end of a garden hose to a cold water source= Water supply should not exceed 140°F (55°C)_

=Check that high pressure hose is attached to pump outlet and that water supply is attached to pump inlet (plastic fitting)_

=Turn ONwater_

*Press trigger on gun and wand assembly to force air from high pressure hose.

=Start engine according to "TO START ENGINE."

12

Page 11 Page 13
Page 12
Image 12
Sears 580.7515 manual Gas, To Turn on Washer
Page 11 Page 13

580.7515 specifications

The Sears 580.7515 is a distinctive piece of technology that emerged in the realm of consumer electronics. Primarily recognized as a high-performance rotary tool, the 580.7515 quickly garnered attention for its versatility and efficiency in various applications, which include crafting, repair, and maintenance tasks.

One of the most notable features of the Sears 580.7515 is its powerful motor, which delivers a robust performance that can handle a variety of materials, including wood, metal, and plastic. The tool operates at multiple speeds, enabling users to adjust the RPM according to the specific requirement of their tasks. This flexibility is particularly beneficial for intricate detail work or when more aggressive grinding is necessary.

The design of the Sears 580.7515 emphasizes user comfort and control. It typically features an ergonomic handle that reduces fatigue during prolonged use, providing a secure grip. The tool's lightweight nature further enhances its usability, making it an ideal choice for both professionals and amateur DIY enthusiasts.

In terms of technology, the Sears 580.7515 is equipped with a universal collet system, allowing users to easily interchange a variety of attachments and accessories. This compatibility significantly expands the range of potential applications for the tool. From sanding and polishing to cutting and engraving, the Sears 580.7515 does it all with relative ease.

Safety is also a priority with the Sears 580.7515. The rotary tool often includes safety features such as a protective guard to shield users from debris and a reliable safety switch to prevent accidental activation. These elements work in tandem to create a safer working environment.

Another noteworthy characteristic of the Sears 580.7515 is its robust construction. Built to withstand the rigors of frequent use, this tool is designed for longevity. Many users appreciate its durability, often citing it as a valuable addition to their toolkits.

Overall, the Sears 580.7515 combines power, versatility, and safety in a compact design, making it a reliable choice for anyone looking to tackle a range of tasks with precision and ease. Its adaptability continues to make it relevant in an ever-evolving market, showcasing the enduring appeal of well-crafted tools.
Top Page Image Contents