Sears 625.34842 owner manual Watersoftenerstart-Up, SET Present Time of DAY

SECTION 1	WATERSOFTENERSTART-UP
!	!
lC.	PROGRAM THE TIMER

		DOWN
display	UP button	button
\	\	/

Se°rsW°terL'°e[ ] ( V_" Kenmore

for CustomerAssistance

1-800-426-9345

DemandWaterSoftener

RECHARGE NOW

_RECHARGE TONIGHT

ON/OFF-HOLD button

(Recharge Tonight-Now)

When the transformer is plugged in, the model code

SR]7 shows in the face plate display for a few

seconds, followed by a test number (example: $3.0).

After the test number, ]2:00 AM begins to flash.

PRESENT TIME and RECHARGE TONIGHT show at

the bottom of the display.

CODE]

I _RESENT TIME

NOTE:

If SR - - is flashing in the display, press the UP [_ button (FIG. 1) until SR]7 shows. Then, press the SELECT button to display the flashing 12:00 AM. If other than SR17 shows, when the transformer is plugged in, please see page 1"7to reset.

SOUND "BEEPER": A "beeper" sounds while pressing buttons for timer set-up. One beep signals a change in the face plate display. Repeated beeps means the timer will not accept a change from the button you have pressed, telling you to use another button. For example, in setting the hardness (step 2),

the beeper sounds repeatedly when the display

J

SEL EC T button

reaches 1 using the DOWN button, or the highest hardness setting using the UP button.

1. SET PRESENT TIME OF DAY:

NOTE:

If the words PRESENT TIME do not show in the dis- play, press the SELECT button (FIG. 1) until they do.

•Press the [_ UP/DOWN {_ buttons to set the present time. Press UP to move the display ahead; press DOWN tO move the time backward.

If the present time is between noon and midnight, be sure PM shows.

			PRESENT	TIME
If the	present	time is	between	I
midnight	and	noon, be	sure AM
shows.			'RESENT	TIME

NOTE:

Each press of the UP or DOWN buttons changes the time by ] minute. Pressing and hoMing the buttons changes the time 32 minutes each second.

6