Sears 625.34855, 625.34854 owner manual Face Plate, HOW Your Water Softener Works Timer Features

SECTION 2

2A. FACE PLATE

HOW YOUR WATER SOFTENER WORKS

TIMER FEATURES

TANK LIGHT

To light the inside of the salt

storage tank, press the TANK

LIGHT button on the face

plate. Press the same button again to turn the light off, or it

will go off automatically in 4 minutes.

_.__;__._ 2.UU n,

I-'iI _ .nn

tank light ON

indicator

PROGRAM MEMORY

If electrical power to the softener goes off, the

time display is blank but the face plate timer

keeps the correct time for about 72 hours. When

electrical power comes on again, you have to

reset the present time only if the display is

flashing. The HARDNESS and RECHARGE

TIME never require resetting unless a change is desired.

WATER FLOW RATE THROUGH THE SOFTENER

To view		the	gallon	per	minute	water	flow	rate
through		the	softener,		if not	already	displayed,
press the #2 SELECT button.
If soft water is being used, the
flow	rate	to	the	closest	1/10
gallon	shows.		If	all	faucets	T
						8
and	water	using		appliances
are off, the display will show 0
flow.
AVERAGE		DALLY GALLONS
Press the #2 SELECT button						""1"o;_	I,,{, !	I_
again	to	show		the average

number of gallons of soft wa-

ter the household uses each

day. This water usage figure is

adjusted daily by the face

plate timer. To turn this dis-

play off, press the #2 SELECT

button once more.

Even if the timer is incorrect after a long power

outage, the softener works as it should to keep

your water soft. However, regenerations may

occur at the wrong time of day until you reset the

timer to the correct time of day.

ERROR CODE

An error code could appear in I _,r,_I

_rr_

problem		occurs in the			softener		{
electronics.		If	you	see	an	error	[_;_i!
the	face	plate		display		if a
code	instead		of	the	present		.__
time	of	day,	please		call	you
local	Sears		Service		Depart-
ment	for	service.

11