14.InsertonePadTube(13)intotheSeatFrame(8). 14InserttheotherPadTubeintotheLegLever(9).Slide two 6"Pads (24) onto each Pad Tube (13).
15. Pivot the Link Tube (16) on the Left Arm(5) onto
the endof the LinkTube Axle (17). Attach the Link
Tube to the LinkTube Axle with a 114"x 1 1/4"
Bolt (49) and a 1/4" Acorn Nut (62).
Tap a 1" x1" Inner Cap (36) into the Link Tube (16).
Attach the LinkTube (16) onthe Right Arm (6) to
the LinkTube Axle (17) in the same manner.
15
24
16
62
24
16. Make sure that all parts are properly tightened. The use of all remaining parts will be explained in USING THE
BODYLIFT on page 11 of this user's manual.
Before using the BODYLIFT, the cable should be adjusted. See HOW TO TIGHTEN THE CABLE on page 10
of this user'smanual. In addition, pull the cable a few times to make sure that it moves smoothly over the pul-
leys. Ifthe cable does not move smoothly, refer to assemblystep 9 on page 7, and correct the problembefore
usingthe BODYLIFT.
9