10.PulltheMomentArm(10)forward. Holdthe lower
and of the Left PressArm (52) inthe upperend of
the Moment Arm. The LeftPress Arm mustbe
turned sothe Handle (12) ison the sideshown.
Attachthe LeftPress Arm withtwo 3/8" x 2 1/2"
Bolts(44) and two 3/8" Nylon Locknuts (33). The
Bolts must be Inserted from the side shown, or
the BOBYLIFT will not function properly.
Pressa Small Bumper (91) ontothe underside of
the Handle (12).
Assemble the Right Press Arm (11) in the same
manner.
11. Insertthe 114"x2 1/2" Cardage Bolt (46) into the
Seat Bracket (38). Attach the Seat Bracket to the
Seat (14) with the two 1/4 x 3/4" Screws (47).
Insertthe 1/4"x 2 1/2" Carriage Bolt (46) intothe
indicated hole in the Seat Frame (8). The narrow
end of the Seat must be facing the curved end of
the Seat Frame. Tighten a 1/4" Nylon Jam Nut(55)
with a 1/4" FlatWasher (40) ontothe Carriage Bolt.
Attachthe other end of the Seat to the Seat Frame
witha 1/4"x 2 1/2" Screw (32) and a1/4" Flat
Washer (40).
12. Attach the Seat Frame (8) to the Front Ul_dght(7)
with the 5/16" x 2 3/4" Bolt (78) and a 5/16" Nylon
Locknut(73). The Moment Arm (10) must be in
front of the indicated tube on the Seat Frame.
Attach the Seat Braces (21) to the Seat Frame (8)
with a 3/8" x 2 3/4" Bolt (85) and a 3/8" Nylon
Locknut(33). Tighten the Nylon Locknuts on both
ends ofthe Seat Braces.
13. Hold the Cable (25) under the indicated 3 1/2"
Pulley(27). Hold the 1/2"x 1" Sleeve (89) between
the small holes inthe lower end of the Leg Lever
(9). Attach the Sleeve withthe 1/4" x 1 3/4" Bolt
(43) and a 1/4"Nylon Jam Nut (55). The Cable
mustbe between the Pulley and the Sleeve.
11
12
13
lO 12
7
73
33
810"
25
52