5.TheConsole(6)requiresfour"D"batteries(not
included);alkalinebatteriesarerecommended.
IMPORTANT:if the exercise cycle has been
exposed to cold temperatures, allow it to warm to room temperature before inserting batteries into the Console, If you do not do this, the console dis- plays or other electronic components may become damaged. Press the tab on the battery cover and remove the battery cover. Insert four batteries into the console; make sure that the batteries are oriented as shown by the diagram inside the battery com- partment. Then, reattach the battery cover.
6. While another person holds the Console (6) near the |
|
|
| |
Upright (3), connect the console wire | harness to the | Console Wire |
|
|
Upper Wire Harness (32). |
| Harness |
|
|
Insert the excess Upper Wire Harness | (32) downward | 40 |
|
|
into the Upright (3). Attach the Console (6) to the |
|
|
| |
Upright with four M4 x 15ram Screws (40). Be careful |
|
| 6 | |
to avoid pinching the Wire Harness. |
|
|
| |
|
|
|
| |
|
| 32 |
|
|
|
| Be careful | to | avoid |
|
| pinching | the | wires |
7.Attach the Seat (12) to the Seat Post (5) with four M8 Nylon Locknuts (37) and four M8 Split Washers (36). Note: The Nylon Locknuts and Split Washers may be preattached to the Seat,
36
37
