ASSEMBLY
Assembly requires two persons. Place allparts ofthe elliptical exerciser in a cleared area and remove the
packing materials. Do notdispose of the packing materials until assembly is completed.
Assembly requires the included hex keys and your own Phillips screwdriver _L_====o, adjustable
wrench _, and rubber mallet __ .
As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parenthe-
ses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The
number following the parentheses is the quantity needed for assembly. Note: Some small parts may have
been preassembled. If a part is not in the hardware kit, check to see if it has been preassembled. If a
part is missing, call 1-888-533-1333.
M6 Locknut
(77)-4 M6 Washer Wave Washer M10 Split
(118)-4 (88)-6 Washer (78)-10
M4 x 16mm M4 x 16mm
Screw (84)-14 Flat Head
Screw (94)-4
M4 x 32mm Screw
(95)-2 M6x 16mmButton
Screw (80)-6 M6 x 38mm Button
Bolt (76)-4
M10 x 20mm Button
Screw (79)-4
M10 x 41 mm Shoulder
Screw (63)-2 M10 x 70mm Button Screw (75)-6
5