Sears 831.288140 manual HOW to Operate the Console, Scan modeÑ When the power is turned on

Mode Indicators

HOW TO OPERATE THE CONSOLE

Note: If there is a piece of clear plastic on the face of the console, remove it before operating the console.

1.To turn on the power, press the console button or simply begin pedaling. When the power is turned on, the entire display will appear for two seconds. The console will then be ready for operation.

2.Select one of the five modes:

Scan modeÑ When the power is turned on, the

scan mode will automatically be

selected. One mode indicator will show that

the scan mode is selected, and

a flashing mode indicator will show which mode is currently displayed. Note: If a different mode is selected, you can select the scan mode again by repeatedly pressing the console button.

Speed, time, distance or calorie modeÑ

To select one of these modes for continuous dis-

play, press the console button repeatedly. The

mode indicators will show which mode is selected. Make sure that the scan mode is not selected.

3.To reset the display, hold down the console button for two seconds. After the display is reset, the scan mode will be selected.

4.To turn off the power, simply wait for about four min- utes. Note: The console has an Òauto-offÓ fea- ture. If the pedals are not moved and the con- sole button is not pressed for four minutes, the power will turn off automatically in order to con- serve the batteries.

7