ASSEMBLY
Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the
packing materials until assembly is completed. Assembly
a phillips screwdriver | and two adjustable |
1.Hold one of the Stabilizers (5) against the Frame (1), with the square holes facing away from the Frame. Attach the Stabilizer with two M8 x 65mm Carriage Bolts (38) and two M8 Nylon Locknuts
(39).
requires the included alien wrench _, wrenches (_::_.
1
Attach the other Stabilizer (not shown) in the same manner.
2.Carefully slide the Handlebar Post (2) up and into place as shown. Secure it with eight M4 x 16ram Tapping Screws (30).
3.Slide the bottom of the Left Handlebar (3) into the
Handlebar Post (2). Be sure that the holes in the Handlebar and the Handlebar Post line up. Attach the Handlebar with two M6 x 34ram Button Head Bolts (14) and two M6 Nylon Locknuts (37).
%_39
Square
538
2
S
Attach the Right Handlebar (4) in the same manner. | 37 |
4
