Electronic Alert & Diagnostic System
WATER
| p_:POWER |
|
LZIE! | dE DEFROST |
|
_ FRBS_ |
| |
| El !CEMAKER |
|
Kenmore | CUBED,cE] | DOOR 1 |
|
| l.woN!on:; |
|
| t |
(_ Red signal light flashes to tell you when either door is open,
When your refrigerator is first plugged in...
(_) Signal light tells you that the Door Alarm beeper has been set to sound after either door has been open 30 seconds_
(_) Red signal light tells you when freezer foodkeeping temperature is above normal.
(_ Lighted word normal indicates that no
failur e has been detected by the diagnostic system
(_) Flashing diagnostic codes in the display warn you when:
Bpower has been interrupted
[]defrost system has failed
11_ frozen foods should be checke&
All panel lights come on for five seconds, a beep sounds, and lights go off except as follows:
•PF flashes in the display Touch SYSTEM
•Word NORMAL glows
•Red W'ARMTEMPERATURElight glows if freezer compartment temperature is higher than normal It goes off when proper foodkeeping temperature is reached
oDoor alarm beeper isactivated and light on DOOR ALARM pad glows
" CRUSHED ice selection light glows,
Red DOOR OPEN light flashes if either door is open, goes out when doors are shut.
° Night light in
[ | icemaker may not be operating properly |
What these codes
(_ System Check pod puts a review of the electronic diagnosis of four coded functions at your fingertip and also allows you to erase codes from display,
(_ Electronic control allows you to select ice cubes, crushed ice or chilled water and signal light confirms your choice