Vacation and Moving Care

Vacation care

Operate your dryer only when you are at home. If you will be on vacation or not using your dryer for an extended period of time, you should:

1.Unplug dryer or disconnect power.

2.Close shutoff valve in gas supply line.

3.Clean lint screen. See “Cleaning the Lint Screen.”

Moving care

1.Unplug the power supply cord.

2.Close shutoff valve in gas supply line.

3.Disconnect gas supply line pipe and remove fittings attached to dryer pipe.

4.Cap the open fuel supply line.

5.Make sure leveling legs are secure in dryer base.

6.Use masking tape to secure dryer door.

Changing the Drum Light

The dryer light automatically turns on inside the dryer drum when you open the door.

To change the drum light

1.Unplug dryer or disconnect power.

2.Open the dryer door. Locate the light bulb cover on the back wall of the dryer. Remove the screw located in the lower right

corner of the cover. Remove the cover.

.

3.Turn bulb counterclockwise. Replace the bulb with a 10-watt appliance bulb only. Replace the cover and secure with the screw.

4.Plug in dryer or reconnect power.

TROUBLESHOOTING

First try the solutions suggested here and possibly avoid the cost of a service call...

Dryer Operation

Dryer will not run

■Has a household fuse blown, or circuit breaker tripped? Replace the fuse or reset the circuit breaker. If the problem continues, call an electrician.

■Was a regular fuse used? Use a time-delay fuse.

■Is the dryer door firmly closed?

■Was the Start button firmly pressed?

Large loads may require pressing and holding the Start button for 2-5 seconds.

No heat

■Has a household fuse blown, or has a circuit breaker tripped?

The drum may be turning, but you may not have heat. Replace the fuse or reset the circuit breaker. If the problem continues, call an electrician.

■Is the valve open on the gas supply line?

Unusual sounds

■Has the dryer had a period of non-use?

If the dryer hasn’t been used for a while, there may be a thumping sound during the first few minutes of operation.

■Is it a gas dryer?

The gas valve clicking is a normal operating sound.

■Is a coin, button, or paper clip caught between the drum and front or rear of the dryer?

Check the front and rear edges of the drum for small objects. Clean out pockets before laundering.

■Are the four legs installed, and is the dryer level front to back and side to side?

The dryer may vibrate if not properly installed. See the Installation Instructions.

■Is the clothing knotted or balled up? When balled up, the load will bounce, causing the dryer to vibrate. Separate the load items, and restart the dryer.

Dryer displaying code message

■“PF” (power failure), check the following:

Was the drying cycle interrupted by a power failure? Press and hold START to restart the dryer.

■“F” Variable (F1, F2, F20) service codes: Call for service.

23

Page 22 Page 24
Page 23
Image 23
Sears 110.9708, 9709 manual Troubleshooting, Vacation and Moving Care, Changing the Drum Light, Dryer Operation
Page 22 Page 24

9709, 110.9708 specifications

The Sears 110.9708 and 110.9709 are popular models in the world of sewing machines, known for their user-friendly features and versatile capabilities. These machines are often favored by both beginners and seasoned sewers, due to their balance of functionality and convenience.

One of the standout features of the Sears 110.9708 and 110.9709 is their range of built-in stitches. These models typically offer a selection of decorative, stretch, and utility stitches, allowing users to explore creativity while sewing garments, quilts, or craft projects. The adjustable stitch length and width provide further customization, ensuring that sewers can achieve their desired results for various projects.

In terms of ease of use, these machines come equipped with intuitive controls. A simple, easy-to-read display guides the user through selecting stitches and adjusting settings. Automatic features, such as the needle threader, significantly reduce setup time and frustration, making these models appealing to those who may be new to sewing.

The Sears 110.9708 and 110.9709 also boast durable construction. They feature a robust build quality, ensuring reliability throughout countless projects. Additionally, the metal chassis provides stability during sewing, reducing vibrations that can affect precision and finish quality.

Another noteworthy characteristic of these machines is their versatility. With the ability to handle various fabric types, ranging from lightweight silks to heavier denim, they are equipped to tackle a wide range of sewing tasks. The adjustable presser foot pressure allows sewers to adapt to different materials, ensuring smooth operation regardless of the fabric used.

For those keen on quilting, these models often include features suited for quilting enthusiasts. Some come with a quilting foot and a walking foot option, facilitating smooth fabric movement and perfecting stitching patterns.

Finally, both the Sears 110.9708 and 110.9709 are compatible with a variety of accessories, expanding their capabilities. With the right attachments, users can explore tasks such as embroidery, buttonholing, and more, further enhancing the machine's flexibility and utility.

Overall, the Sears 110.9708 and 110.9709 serve as excellent sewing companions, combining technology, ease of use, and durability to nurture creativity and elevate sewing projects for users of all skill levels.
Top Page Image Contents