Sears NTL61011.1 user manual Start all four Screws, and then tighten

8. Insert the Console Frame (87) into the Handrails	8
(71, 72). Attach the Console Frame with the
four 1/4" x 1" Screws (10) that you removed in		87
step 8. Start all four Screws, and then tighten
them. Be careful not to pinch the Upright Wire
(not shown).				9
Firmly tighten the four 3/8" x 3 1/2" Screws (9).
			10	72
		9
	10		71
9. With the help of a second person, hold the con-	9
sole assembly near the Left Handrail (71) and
			Console
the Right Handrail (not shown).
Connect the Upright Wire (70) to the console			Assembly
wire. See the inset drawing. The connectors
should slide together easily and snap into
place. If they do not, turn one connector and try
again. IF YOU DO NOT CONNECT THE CON-
NECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON				Console
THE POWER. Then, remove the wire tie from
the Upright Wire.				Wire
			70
		Console
		Wire	71
			Wire
		70	Tie
	11