IGHTBULBCHANGING
NOTON ALLMODELS
ElectricalShock Or PersonalInjuryHazard
Disconnect electrical supply before servicingor cleaning the unit. Failureto do socould resultin electrical shock or personal injuryfrom cleaner suddenlystarling.
Disconnect electrical supply.
Bulb Housing
The handle must be pulled down and the cleaner turned over.
Release the lower plate by pushing the tabs in toward the center.
Grasp the clips at the back and pull forward and up to remove the lower plate.
With the lower plate off the bulb housing can be
pulled off the flange it is mounted to by wiggling the socket back and forth,
With the bulb housing loose the bulb can be removed by pushing in and twisting it counterclock- wise. The new bulb can be placed in the socket, J_ine up the post on the bulb with the slots in the socket and while pushing the bulb ir_to the socket, twist the bulb clockwise.
(NOTE: See page 3 for Bulb #,)
Replace the lightbulb withthe same or smaller
wattage sizeto prevent damage to surrounding parts.
Reinsert the bulb housing onto the flange by pushing. down.
Reinstall the lower plate by placing the front tabs on the plate into the slots on the nozzle housing and pushing the plate to the rear until the back clips snap into place, Push the tabs to the outside.
14
