Y
HANDLEASSEMBLY
Before assembling your vacuum cleaner, be sure you have all the parts shown on page 3.
ElectricalShock Hazard
Do not plug into electrical supply untilassembly Is complete. Failureto do so could resultin electrical shock or injury.
Handle
Hooks
Handle
Scn_
Back Of | I |
v-uum°'I ll
Remove the handle screw located just below the top
edge of the back of the vacuum, (see illustration above).
Position the handle so the cord hooks are toward the back of the cleaner.
Insert the handle into the opening at the top of the vacuum.
Align the handle screw in the hole in
the handle and the
handle screw hole in the back of the
vacuum.
Insert the handle screw so it passes
In Vacuum
Handle
Screw
and Hole
through the back of the vacuum into
the handle.
Begin to tighten the screw with your fingers. It may be necessary to adjust the handle slightly.