VACUUM
WARNING
personal Injury and Product Damage Hazard
•DO NOT use outlets above counters. Damage to items in surrounding area could occur.
•Use care in plugging in the vacuum. The vacuum should be in the OFF position.
| i. Turn the top | |
Quick Release | cord | hook down. |
| 2. Pull the cord off | |
| the | hook. |
3.Once the cord is removed, lock the
cord | into place | by | Locking | |
Notch | ||||
forcing | it into the |
| ||
locking | notch | on the |
| |
body | of the cord |
| ||
hook | as shown. |
| ||
4.Plug the cord into 120 volt o_ttlet locat-
ed near the floor,
NOTE: To reduce the riskofelectricshock,thisvacu- um cleanerhas a polarizedplug,(one blade iswider than the other).Thisplugwillfitina polarizedoutlet onlyone way. Ifthe plug does not fitfullyinthe out- let,reversethe plug.Ifitstilldoes notfit,contact a qualifiedelectricianto installthe proper outletDo. notchange the plug inany way.
Foot Rest For
Handle Release
5.Place your foot on the pad at the left rear of the cleaner and pull back on the handle until it releases from its upright position,
6.With your left hand reach down and push the "ON- OFF" switch to the right. The cleaner will now staff.
To shut the cleaner "OFF" reach down and push the switch to the left, Raising the handle up will catch the handle support spring and hold the handle in the upright position.
WTOSELECT PROPERHEIGHT FORCLEANING
Thiscleaner has four heights in which the nozzle can be set up off the floor for the various surfaces you are trying to clean.
The height adjust knob is on the nozzle over the light
lens.The settingsare:EX LOW, LOW, MED and HIGH.
To adjust the height, grasp the knob and move it to the desired setting,
Adjustcleaner
heightsby refer- ringtothe chaff below to match
the type ofsur- face tobe cleaned:
Height Adjust Knob
EX LOW: very low pile.
LOW: shortormedium pile.
MED: medium to long pile.
HIGH: shag carpet,long pile,plush,scatterrugs.
Place unit in "HIGH" when using attachments to pre- vent possible floor damage.
