SECO-LARM USA EV-1626-NKGQ 2.8~12mm, EV-1626-NWGQ 6~50mm manual Sense-Up Sense-Up

On-Screen Display Manual

AGC (AUTOMATIC GAIN CONTROL): A higher gain increases brightness, but also increases any noise.

A.OFF: Deactivates the AGC function.

B.LOW: Sets automatic gain control to LOW.

C.MIDDLE: Sets automatic gain control to MIDDLE.

D.HIGH: Sets automatic gain control to HIGH.

SENSE-UP: Selecting this will magnify existing light sources so the camera can pick up images at night. The values range from 2x~258x.

If the AGC mode is turned OFF, the SENSE-UP function will be disabled.

Note:

SENSE-UP SENSE-UP

Pressing the SET button in AUTO mode lets you adjust the image brightness by increasing or decreasing the shutter speed (2x~258x).

The higher the level, the brighter the image becomes. However, an afterimage (ghosting) may appear.

When SENSE-UP is activated, the increased magnification may induce noise and pixelation. This is normal.

BLC (BACKLIGHT COMPENSATION): This camera provides intelligent light-level control to overcome strong backlight conditions.

A.Move the indicator to BLC using the UP and DOWN buttons on the EXPOSURE menu screen.

B.Select the desired level by using the LEFT and RIGHT buttons.

OFF: Turns BLC function off.

BLC: Users can select and define a specific area, and view that area clearly. HSBLC (High Spotlight Back Light Compensation): When there are both bright and dark image areas,

HSBLC makes both distinct.

SENSE-UP

SECO-LARMU.S.A., Inc. 7