Precautions:
PLEASE READ THIS MANUAL THOROUGHLY BEFORE USING THE CAMERA TO BECOME FAMILIAR WITH THE CORRECT OPERATIONAL PROCEDURES.
Precautions While Camera is in Use:
Do not open the camera body or touch any electrical parts.
Electric shock may occur.
Do not insert objects into the camera body.
Doing so may cause fire or electric shock.
Do not touch the camera with wet hands.
Electric shock may occur.
Do not disconnect the power cord from the camera before disconnecting from the wall outlet.
Always disconnect the power by removing the plug from the wall outlet.
If the camera emits a burning smell, immediately disconnect it from the power source and report the problem to your distributor.
Precautions When Installing:
Do not install the camera where it might be exposed to extreme temperature conditions. Only use the camera in conditions where temperatures are between 14°~122° F
Do not install or use the camera in an area where humidity is high.
Do not install the camera in dusty environments.
Do not install the camera under unstable lighting conditions.
Severe lighting change or flickering can cause the camera to work improperly. If the camera is exposed to a spotlight or an object reflecting strong light, smear or blooming may occur.
Do not touch the front lens.
This is one of the most important parts of the camera. Be careful not to leave fingerprints on the lens cover.
Do not drop the camera or subject it to physical shocks.
Malfunctions may occur.
Never keep the camera pointed directly at strong light.
Continuous exposure to intense light may damage the CCD.
Do not expose the camera to rain or other liquids.
If the camera gets wet, wipe it dry immediately. Liquids may contain chemicals that corrode the electronic components.
Do not expose the camera to radioactivity. If exposed to radioactivity, the CCD will fail.
Only apply power after the installation of the product.
Please check that the power satisfies the normal specifications before connecting the camera.
2 | U.S.A., Inc. | |
|
|
