ENFORCER PASSIVE PCI VIDEO BALUN HUB

4.Connect the other ends of the UTP cables of the respective cameras into the screwless terminal block on the EVT-PC4-VT2Q side, see Fig. 3. Each video signal from the CCTV camera requires one positive and one negative wire, so observe correct polarity when connecting the UTP cables. “Vi-1” represents the video input and “Vo-1” represent video output of channel 1.

NOTE: Bare wires must not be exposed outside of the EVT-PC4-VT2Q’s terminal block.

5.Connect the included male-to-male BNC cable. Connect one end to the BNC female connector of the EVT-PC4-VT2Q side and connect the other end to the BNC female connector of the DVR card side. Connect as many cables as needed.

6.Test the connection by powering up the CCTV camera and DVR card to make sure they operate as expected.

ENFORCER PASSIVE PCI VIDEO BALUN HUB

Fig. 3: Wiring the EVT-PC4-VT2Q’s screwless terminal block.

EVT-PC4P-JTQ Wiring - Power Cord

1.When using EVT-PC4P-JTQ, the supplied 8-pin wire assembly must be first connected to the 8-pin connectors of both EVT-PC4-VT2Q and EVT-PC4P-JTQ, which are located on their respective PC boards, before mounting them to the computer chasis. Please see Fig. 1 & Fig. 5.

IMPORTANT – When using the EVT-PC4P-JTQ, the video signals from the CCTV cameras MUST be connected on the terminal blocks of the EVT-PC4P-JTQ side and the video input terminal blocks of the EVT-PC4-VT2Q must not be connected to any video signal. This means that when the EVT-PC4P-JTQ is used the video input must be connected on the EVT-PC4P-JTQ side.

2.To minimized voltage drop, use two UTP wire pairs for power transmission. Use the spare blue/blue-white wire pair and brown/brown-white wire pair of the UTP cable for 12 VDC power transmission. Connect one end of the UTP cable to the EVT-PC4P-JTQ’s terminal block with “PWR’ marking. CORRECT POLARITY MUST BE OBSERVED.

3.Plug the included power adaptor into the power jack of the EVT-PC4P-JTQ and plug the power adaptor’s power cord into the electrical outlet. Use on-board LED to verify polarity. See fig. 1.

4.Check the voltage reading at the end of the power line (camera side) to verify it is correct before connecting it to the CCTV cameras.

WARNING: Using a voltage output in excess of the specified voltage level of a camera may cause damage.

Figure 4: EVT-PC4-VT2Q wiring diagram.

Male-to-Male BNC cable (included)

SECO-LARM’s EVT-PB1

(Passive Video Balun -

not included)

ENFORCER

CAT 5

Bullet Cam

 

ENFORCER CAT 5

Camera

CAT 5

CAT 5

ENFORCER

Dome Cam

DVR Card

EVT-PC4-VT2Q

Fig. 1: EVT-PC4-VT2Q and EVT-PC4P-JTQ product overview.

Video output to DVR card

 

1 Video-In and 1 Power-Out terminal

Power Input

block per channel (Total of 4-channel)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Video input

Jack

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

from CCTV

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

cameras

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8-pin connector

 

 

 

 

 

 

 

8-pin

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

connector

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

EVT-PC4-VT2QEVT-PC4P-JTQ

 

Tri-Color Power LED

 

(12-24 VDC/VAC only)

Blue

DC Polarity Correct

Red

DC Polarity Incorrect

Purple

AC ~ ~AC

AC Voltage

Figure 5: EVT-PC4-VT2Q and EVT-PC4P-JTQ wiring diagram.

NOTE: Use SECO-LARM’s EVA-F5521-3Q

DVR Card

pigtail connector to avoid cutting the

8-pin wire assembly

DC jack of the camera. Cutting it will

(included)

void the warranty.

EVT-PC4-VT2Q

 

 

EVT-PC4P-JTQ

Fig. 2: Installing EVT-PC4-VT2Q and EVT-PC4P-JTQ into the back panel of PC.

 

 

 

 

Computer

 

 

 

 

 

 

 

 

cover

DVR card

 

 

 

 

EVT-PC4-VT2Q

 

 

 

 

(Video)

 

 

 

 

 

 

 

 

EVT-PC4P-JTQ

 

 

 

 

(Power)

 

 

Back panel slot

 

 

 

 

12 VDC

 

Adapter

 

CAT 5

 

SECO-LARM’s EVA-F5521-3Q

ENFORCER

CAT 5

Bullet Cam

 

CAT 5

CAT 5

ENFORCER

Dome Cam

Page 2

 

Page 3

Page 2
Image 2
SECO-LARM USA EVT-PC4-VT2Q, EVT-PC4KQ installation manual EVT-PC4P-JTQ Wiring Power Cord

EVT-PC4P-JTQ, EVT-PC4KQ, EVT-PC4-VT2Q specifications

SECO-LARM USA is a renowned name in the security technology industry, known for its innovative products that cater to a wide range of surveillance and security needs. Among their cutting-edge offerings are the EVT-PC4P-JTQ, EVT-PC4KQ, and EVT-PC4-VT2Q, which are part of their advanced video intercom and surveillance systems.

The EVT-PC4P-JTQ is a versatile 4-channel video intercom system that boasts a stylish and modern design. It supports multiple video outputs, including HDMI and VGA, making it compatible with a variety of display options. One of its primary features is the ability to support clear two-way audio communication, allowing users to converse with visitors or clients from a distance effortlessly. With an intuitive user interface and touchscreen capabilities, the EVT-PC4P-JTQ ensures easy navigation through its various functions.

The EVT-PC4KQ takes things a step further by enhancing video resolution capabilities. This advanced model supports 4K video output, providing crystal-clear imagery that is crucial for identifying visitors and monitoring environments effectively. Additionally, the EVT-PC4KQ is equipped with advanced image processing technologies, including noise reduction and enhanced low-light performance. This enables a consistent video feed in various lighting conditions, ensuring dependable surveillance day and night.

The EVT-PC4-VT2Q is designed for versatility and expanded connectivity options. It features a robust integration capability, allowing users to connect various cameras and sensors seamlessly within a single system. Its modular design means it can be easily scaled to suit different premises, from small businesses to expansive commercial buildings. Featuring remote access through mobile applications, users can monitor and manage their security systems from anywhere, ensuring peace of mind on-the-go.

In terms of security features, all three models come equipped with advanced encryption protocols to protect against unauthorized access. This emphasis on cybersecurity is essential for maintaining the integrity of sensitive video data. Whether you are looking to enhance the security of a retail establishment, office building, or residential property, SECO-LARM's EVT series stands out for its reliability, clarity, and user-centric design.

In summary, the EVT-PC4P-JTQ, EVT-PC4KQ, and EVT-PC4-VT2Q models from SECO-LARM USA embody modern security solutions. With their advanced technologies and robust characteristics, these intercom systems are ideal for those seeking comprehensive surveillance and communication capabilities in a single, streamlined product. Their combination of quality video output, reliable audio communication, and enhanced connectivity makes them an excellent choice for various security applications.