12. GAME BOARD
In order to prevent an electrical shock, be sure to turn power off before performing work by touching the interior parts of the product.
Be careful so as not to damage wirings. Damaged wiring can cause an electric shock or short circuit accident.
Do not expose the Game BD, etc. without a good reason. In this product, setting changes are made during the test mode. The Game BD need not be operated. Use the Game BD, etc. as is with the same setting made at the time of shipment.
12 -1 REMOVING THE GAME BOARD
To replace the IC Board or to change dip switch settings, take out the IC board using the following procedure;
1Turn main switch off.
2Unlock Cabi Drawer, pull outward, exposing all game components.
3Disconnect all connectors connected to the Shield Case.
4Take off the 4 screws to remove the Shield Case. The game board is inside the shield case.
NAOMI GAME BD
30
