Seiko Group BP-6000 Set by n1 + n2 x ESC Z n1 n2, N1 + n2 x ESC \ n1 n2, For Example, ESC m n1 n2

B. Control code summary (FX)

ITEM	SYMBOL	Hexadecimal Decimal				FUNCTION
[66]	ESC Y n1 n2	[1B,59,n1,n2,data] H				Prints 8-pin double-speed double-density graphics
	data	[27,89,n1,n2,data] D				(120 dpi). The total number of dots in the data is
						set by n1 + n2 x 256.
[67]	ESC Z n1 n2	[1B,5A,n1,n2,data] H				Prints 8-pin quadruple-density graphics (240 dpi).
	data	[27,90,n1,n2,data] D				The total number of dots in the data is set by
						n1 + n2 x 256.
[68]	ESC \ n1 n2	[1B,5C,n1,n2] H				Sets relative dot position to the current position.
		[27,92,n1,n2] D				The dot pitch is 1/120 inch.
		(For Example)
		n1 + (n2 x 256)< 32768 (8000h), then move n1 + (n2 x 256) dots to the right.
		n1 + (n2 x 256) ≥ 32768, then move 65536 - {n1 +(n2 x 256)} dots to the
		left from the current position.
[69]	ESC ^ m n1 n2	[1B,5E,m,n1,n2,data] H				Sets various 9 pin graphic mode.
	data	[27,94,m,n1,n2,data] D				The total number of dots in the data is set by
						(n1 + n2 x 256) x 2.
				m	Graphic Type			Number	Maximum	Horizontal
								of Pins	Columns	Density
			0		Standard-density		9		816	60
			1		Double-density		9		1632	120
			2		Double-speed double-density		9		1632	120
			3		Quadruple-density		9		3264	240
			4		80 dpi graphics		9		1088	80
			5		72 dpi graphics		9		979	72
			6		90 dpi graphics		9		1224	90
			7		144 dpi graphics		8		1958	144
						MSB		MSB

					1st	2nd
			2 bytes		byte	byte
[70]	ESC a n	[1B,61,n] H [27,97,n] D		Justification mode.
				n=0 : left justification is set (default).
				n=1 : centering is set.
				n=2 : right justification is set.
				n=3 : full justification is set.
				When n is other than 0, the printer performs one
				linefeed after printing.
[71]	ESC b c n1 n2	[1B,62,c,n1,n2,...,n16,00] H		Sets vertical tab position in channels beginning from
	...n16 NUL	[27,98,c,n1,n2,...,n16,0] D		n1 and end with NUL [00]H as in ESC b command.
				c specifies one of channels 0 to 7 to be set.
[72]	ESC g	[1B,67] H [27,103] D		Selects 15 cpi mode.
[73]	ESC j n	[1B,6A,n] H [27,106,n] D		n/216" reverse		linefeed after printing (0≤ n≤ 255).

This command is ignored in the cut sheet feeder mode.

78