Invert LCD display
This function sets up-side down text display in the LCD. Use with the reverse control panel
sheet. (See page 7)
Setting of ENERGY STAR
(1) Set the power conservation standby mode.
(2) When this mode is valid, if the HC and (or) LF motors stop, the current to HC, LF,
FAN, and the ribbon motor is interrupted 14 minutes later then the standby power
conservation mode is engaged. Switching to the normal mode is effected when any
mechanical action is required.
Saving user setup options
This function saves the current setup into one of three memory areas.
Press the ENTER key to store the current setup in the desired memory area. This does not
affect the current setting.
51
5. Extended setup options (43-45)
45 SAVE SETUP
SETUP: MEM1
SETUP: MEM2
SETUP: MEM3
43 INVERT DISP
INVERT: NO
INVERT: YES
44 SLEEP MODE
SLEEP MODE:YES
SLEEP MODE:NO