Seiko Group BP-6000 Input Hexadecimal Dump Mode, To run this mode in draft printing, Example

7. Troubleshooting

❏Input Hexadecimal Dump Mode

The Input hexadecimal dump capability of the printer enables monitoring of data as it is sent to the printer. Each Escape Sequence, Control Code, and ASCII character sent from the computer to the printer is output in a two-digit hexadecimal format. Such printing is initiated after 16 bytes of data have been transmitted to the printer. Hexadecimal values and their corresponding ASCII characters between the values 20h to 7Eh are printed on each line.

							POWER
							ON LINE
L C	D	PARK	TOF SET	M.LF	LF	FF	P.OUT
		EXIT	ENTER
RESET		SETUP	BIN	M.RLF	RLF	TEAR OFF	ON LINE

To run this mode in draft printing

Press the FF key while turning ON the printer or pressing the RESET key. Hold down the FF key until the LCD displays "HEXDUMP"

To run this mode in NLQ printing Press the FF and ONLINE keys simultaneously while turning ON the printer or pressing the RESET key. Hold down the FF and ONLINE keys until the LCD displays "HEXDUMP"

To terminate this mode

Press the RESET key or turn off the power.

Example

10 REM HEXADECIMAL DUMP LIST EXAMPLE

20 OPEN "LPT1:"AS #1

30 WIDTH #1,255

40 PRINT #1,"ABC";CHR$(13);CHR$(10);

50 PRINT #1,"123";CHR$(13);CHR$(10);

60 PRINT #1,"HENRY IS HANDSOME"

70 END

00000	41 42 43	0D	0A	31	32 33	0D	0A	48	45	4E 52 59 20	ABC..123..HENRY
00010	49 53 20	48	41	4E	44 53	4F	4D	45	0D		IS HANDSOME.

Note

ASCII characters are printed according to hexadecimal codes of the data. Codes other than 1Bh and 20h to 7Eh are printed as “.” (2Eh). For the code 1Bh, “IE ” is printed in draft mode and “ESC” is printed in NLQ mode.

57