Seiko Group BP-6000 Mode Code & Hexadecimal Hex. = selection BAR Code data, Sequence, Element

B. Control code summary (bar code)

ITEM	Mode	Code & Hexadecimal	n: (Hex.) = selection
[1]	BAR CODE data	DC4, DC4, B, n	Specifies the numler ("n") of data to be regarded as
	sequence	14, 14, 42, n	bar code data.
			0 < n < 44H
[2]	Check digit	DC4, DC4, C, n	Selects/deselects to add a check digit automatically.
		14, 14, 43, n	n: 00=No,
			01=Yes.
[3]	Element	DC4, DC4, E, n1, n2	Changes the width of a bar, space, or intercharacter
	variables	14, 14, 45, n1, n2	gap. n1 specifies the type of element and n2 sets
			variable width in n2/120 inches.
			This command is not effective in postnet bar code.
			n1: 00=Narrow bar
			01=Wide bar
			02=Narrow space
			03=Wide space
			04=Intercharacter gap (ICG)
			n2: n2/120" (1≤ n2≤ 127)
[4]	HRI font	DC4, DC4, F, n	Selects HRI character font.
		14, 14, 46, n	This command is not effective in postnet bar code.
			n: 00=Current selected font
[5]	Bar code height	DC4, DC4, H, n	Sets bar code height to n/12 inch (1≤ n≤ 120).
		14, 14, 48, n	This command is not effective in postnet bar code.
			If n≤ 4, HRI print is disabled.
[6]	HRI print	DC4, DC4, I, n	Selects HRI character not to be printed or to be printed
		14, 14, 49, n	below or above bar code.
			This command is not effective in postnet bar code.
			n: 00=No print
			01=Below bar code
			02=Above bar code
[7]	Bar code type	DC4, DC4, T	Selects a bar code type.
		14, 14, 54, n	n: 00=Industrial 2/5, n:	07=Code 128,
			01=Interleave 2/5,	08=EAN 8,
			02=Matrix 2/5,	09=EAN 13,
			03=Codabar,	0A=UPC-A,
			04=Code 11,	0B=UPC-E,
			05=Code 39,	0C=Postnet
			06=Code 93,	FF=Element
[8]	Guard bar	DC4, DC4, G, n	Euables/disables the guard bar extension (long bar).
	extension	14, 14, 47, n	in EAN and UPC.
			n: 00=Disable guard bar extension
			01=Enable guard bar extension (default)
[9]	Start/stop char.	DC4, DC4, N, n	Assigns the start and stop character for the Codabar.
	assignment	14, 14, 4E, n	n: 00=Start character
			01=Stop character
			n: 02={"a", "b", "c", "d", "e", "t", "n", "*"}
			Default is "a" as the start and stop character
[10]	Start/stop char.	DC4, DC4, S, n	Selects to print the start and stop character as HRI for
	print	14, 14, 53, n	Codabar, Code 11, Code 39, and Code 93.
			n: 00=To print(default)
			01=Not to print
[11]	Code 128	DC4, DC, V, n	Selects code sequence in Code 128 to be treated as a
	code sequence	14, 14, 56, n	character value or as a character code.
			n: 00=character code(default)
			01=character value
[12]	Bar code end	ESC SO	Indicates the end of bar code data sequence.
	sequence	1B, 0E	This sequence is valid when
			#27 BAR CODE is to MODE2
			in the SUB-MENU of SETUP MODE.
[13]	Bar code start	ESC SI	Treats the following immediate data as a bar code.
	sequence	1B, 0F	This sequence is valid when
			#27 BAR CODE is to MODE2
			in the SUB-MENU of SETUP MODE.

90