Seiko Group BP-6000 owner manual Reset

3. Control panel and operations

							POWER
							ON LINE
L C	D	PARK	TOF SET	M.LF	LF	FF	P.OUT
		EXIT	ENTER
RESET		SETUP	BIN	M.RLF	RLF	TEAR OFF	ON LINE

•TOF SET

		Pressing this key sets the top of the form position at the current print head
		position. However, this TOF position will not be restored after the power is
		turned off.
	TOF SET
•	TEAR OFF	[Used only for fanfold paper]
		Pressing this key advances the perforation of the form to the paper cutter so
		that the paper can be torn off from the rest.
	TEAR OFF	If this key is pressed after the paper is torn off, the paper is fed backwards
		and the mode is returned to the offline mode . If the ON LINE key is
		pressed instead of the TEAR OFF key, the paper is fed backwards and then
		the mode is changed to the online mode.
•	PARK	(Paper parking)
		Pressing this key unloads the paper when the paper is loaded and loads the
		paper when the paper is not loaded.
	PARK	Fanfold continuous paper (Paper select lever in fanfold setting)
		The paper is moved to the park position in the back of the printer by
		pressing this key. When pressing this key with the paper in the park
		position, the paper will be loaded to a print station which is between 0/72
		and 180/72 inches from the leading edge of the paper, depending on the
		loading position programmed in the setup option.
		Single sheet paper loaded (Paper select lever in single sheet setting)
		The paper in the print station will be ejected. When paper is in the paper
		rack, the paper is moved to the print station by pressing this key.
•	RESET
		When the RESET key is pressed, the printer immediately enters the reset
		state and prepares for the initialize operation, which is nearly the same
		initialize operation as when the power is turned on.
	RESET

18