Operating your Receiver
Storing radio stations:
The receiver can store up to 40 radio stations in memory. You can enter every single radio station yourself or the receiver can store all available radio station automatically in an ascending order.
Automatic preset storing
Manual preset
1.Select FM, MW or LW band by pressing BAND on the main unit or tuner on the remote control repeatedly.
1. Select the band by pressing BAND on the main | BAND TUNING MEMORY |
unit or tuner on the remote control. | SOURCE |
|
BAND | TUNING MEMORY |
|
|
SOURCE |
| 2. Tune to the radio station to be stored. (see | |
|
| ||
|
| "Manual tuning" on page 16 above for details) | |
|
| 3. Press and hold the MEMORY button on the front | |
2- Press and hold | BAND | panel or MEMO on the remote control. "MEMORY" | |
and a preset number will flash on the display. | |||
on the main unit for 3 |
|
| |
seconds. “MEMORY” will | BAND TUNING MEMORY |
| |
be displayed in red and | SOURCE |
| |
will blink during the | BAND TUNING MEMORY | SET | |
|
| ||
automatic storing | OK |
process. | OPEN/CLOSE |
|
Radio frequencies will be scanned and radio station stored automatically. When all available radio stations are stored or if all 40 memory locations are full, the auto preset will stop.
NOTE
Weak signal can affect the "Automatic Preset Storing function" efficiency. Adjust the antenna for the best reception for more efficient search.
4.Press TUNING UP/DOWN on the main unit or pr+ / pr - on the remote control while
MEMORY is still flashing to select the desired preset memory location.
BAND | TUNING | MEMORY |
|
| OK |
|
| OPEN/CLOSE |
5.Press the MEMORY button on the front panel or the MEMO button on the remote control to store frequency in selected preset location.
6.Repeat steps
16
