Technicolor - Thomson DPL4000 Fine Setting of the Components, Input Signal Setting, Digital Input

Advanced Sound Control

Fine Setting of the Components

The receiver has pre-selected surround mode once you turn on the unit by pressing the Source Buttons (like DVD, SAT, CD) directly. The default surround modes for different components are listed in the table below.

If you decide to change the surround mode, you can press the SURR MODE button on the main unit or theater modes on the remote control repeatedly to toggle among the different surround mode choices and select the one you want.

PLII MOVIE		PLII MUSIC	PRO LOGIC	Stereo
	Source/	If Digital Input (optical		If Analog Input
	Input	or coaxial) is selected		is selected
	DVD	Dolby Digital/DTS		PRO LOGIC
	SAT	Dolby Digital/DTS		PRO LOGIC
	VCR	N/A		PRO LOGIC
	V-AUX	N/A		PRO LOGIC
	TV	Dolby Digital/DTS		STEREO
	CD	STEREO (PCM)		STEREO
	TAPE	N/A		STEREO
	TUNER	N/A		STEREO

The receiver will keep the last selection in memory.

NOTE

If linear PCM source (CD), format will be Dolby Prologic even with Digital Input.

Input Signal Setting

The receiver defaults to the most convenient settings for your easiest use (see table).

If your connection is different from the default set- ting,

1.Select the source

2.Press DIGITAL INPUT button on the main unit or digital button on the remote control to toggle among optical/ coaxial/ analog to match your connec- tion. Your selection will be stored automatically.

The selected source and input source will be dis- played on the display as long as they are active, except for some temporary change of display (e.g. adjusting volume).

Digital Input

Select this setting to play digital signals from a DVD,		EN
CD, SAT or TV.
SOURCE	DEFAULT INPUT (as seen on display)
SAT	Analog (SAT/ ANL)
DVD	Analog (DVD/ ANL)
CD	Analog (CD/ ANL)
VCR	Analog (VCR/ ANL)
V-AUX	Analog (V AUX/ ANL)
FM/AM	Built-in Tuner
TAPE	Analog (TAPE/ ANL)
TV	Analog (TV / ANL)

NOTE

Digital input is only available for DVD, SAT, CD,

V Aux and TV

Analog Input

Select this setting to play analog signals from a cassette deck or VCR.

SOURCE	AVAILABLE INPUT
SAT	Analog / Optical / Optical2 / Optical3 / Coaxial
DVD	Analog / Optical / Optical2 / Optical3 / Coaxial
CD	Analog / Optical / Optical2 / Optical3 / Coaxial
VCR	Analog / - / -
V-AUX	Analog / Optical / Optical2 / Optical3 / Coaxial
TAPE	Analog / - / -
TV	Analog / Optical / Optical2 / Optical3 / Coaxial

21