5-10
Setup parameter priority mode
HP-GL PDL and D-SCAN PDL allow for selecting the setup parameter
priority mode (DATA FIRST/PANEL FIRST). Even if the DATA
FIRST mode is specified, the settings preset in this printer are used for the
parameters to which no data has been specified.
Setting items to be affected by parameter mode (D-SCAN only)
COPY COUNT
FIXSIZE MODE
WRITE MODE
MIRROR
DRAWING
PAPER NO.
Setting items to be affected by PEN PAR. MODE
PEN n WIDTH
PEN n DENSITY
PEN n CORNER Note)
PEN n JOINT Note)
Note: Equipment setting is always enabled in the D-SCAN PDL.
When a printer driver HP-GL PDL is used and the printer driver setting is
disabled (PRT DRIVER = DISABLE), setting of this device is enabled
without using the setting on the printer driver screen of the computer.
(G)
metiyhcrareihdrihTretemaraPskrameR
ELACSEGAMI EDOM.WARDENIL
EDOMERUTCIP
GNINEERCS
EDOM.WARDENIL
EDOMSCIHPARG
EDOMERUTCIP
ylnoFFIT,NACSD,LG-PH