14-21
▼When an error message appears
Chapter 14 Troubleshooting
(2) Mail interface
(3) USB interface
■PDL warning
Description : This message appears if any problem exists in the data
sent from the computer.
Measure : Remove the cause of problem, and recreate the data
correctly. For practical measures, see the table.
WINTERFACE-MLxxxx
WINTERFACE-USxxxx
xxxx: Error code
xxxx: Error code
Error code Description Measure
0300 to 04FF Lack of internal memory If the device does not recover from this error by
turning the power off and on, take the following
measures:
- Check if the communication condition and
protocol match the specifications of computer.
- Check if the connection cable is defective or
connected securely.
- If the error is not removed, please notify your
dealer or our service center of the displayed error
message and error condition.
2100 to 24FF Protocol data sent from the
host is defective
0100 to 01FF
Communication to the host
failed while communication
time out data is transferred
1000 to 1FFF Communication connection
system error
2000 to 2FFF Communication system
internal error
edocrorrEnoitpircseDerusaeM
FF11ot0011 tonsisserddarevresPTMS
.deificeps .sserddarevresPTMSehtyficepS
FF21ot0021.dnuoftonsirevresPTMS dnagnittessserddastirofrevresTPMSehtkcehC-
dna,gnittes,sutatsstiroftsohrevresTPMSeht
.noitcennoc
ruoyyfitonesaelp,devomertonsirorreehtfI-
rorredeyalpsidehtforetnececivresruororelaed
.noitidnocrorrednaegassem
FFA1ot0031
derongirevresTPMS
revresTPMSro,locotorp
.dnopsertonseod
FFB1ot00B1 ehtderongirevresTPMS
.gnissecorpgnitanimret