Putting the devices into operation
To detach the belt clip:
Lift one side of the belt clip as shown in the diagram on the
Press down the belt clip at one fixing point and pull it out of the transmitter housing.
Repeat for the other side.
SKM 100 radio microphone
Inserting the batteries/accupack
For powering the radio microphone, you can either use two 1.5 V AA size batteries or the rechargeable Sennheiser BA 2015 accupack.
Unscrew the lower part of the radio microphone from the radio microphone’s body by
turning it counterclockwise.
When unscrewing the radio microphone during operation, the muting function is automatically activated. “MUTE” appears on the display panel.
When screwing the lower part of the radio microphone back to the radio micro- phone’s body, the muting function is deactivated.
Slide back the lower part of the radio microphone as far as it will go.
Open the battery compartment cover .
Insert the batteries or the BA 2015 accupack as shown on the battery compartment cover. Observe correct polarity when inserting the batteries/accupack.
Close the battery compartment cover .
Push the battery compartment into the radio microphone’s body.
Screw the lower part of the radio microphone back to the radio microphone’s body .
15