Sennheiser 100 G3 Selecting a standard display, MUTE, B.Ch:, ew100 G3, ew100 G3, 543.200MHz

Using the devices

Selecting a standard display

EM 100

 Press the UP/DOWN button to select a standard display:

Contents of the display										Selectable standard display
40			PEAK0		1. 1			ew100 G3		“Receiver Parameters”
25			-20		543.200MHz					appears after switch-on of the receiver and displays the
			-10
10			-30
					P		MUTE			receiver parameters (see page 5).
	RF		AF
						PEAK				“Soundcheck” (display with additional function)
		40					Soundcheck
				0
		25		-10			543.200 MHz			displays the signal quality within the transmission area.
				-20
		10		-30			MUTE
		RF				AF				“Guitar Tuner” (display with additional function)
			PEAK
40			0						MUTE
25			-10						440Hz	displays the guitar tuner.*
10			-20
			-30
	RF		AF

*The “Guitar Tuner” standard display is deactivated upon delivery. To show this standard display, you have to activate it (see page 26).

Information on the soundcheck function and the guitar tuner function can be found in the instruction manual of the EM 100 receiver available on the ew G3 product page at www.sennheiser.com.

SK 100 and SKM 100

To select a standard display:

SK 100						SKM 100
					Press the rocker button		Move the multi-function switch
Contents of the display Selectable standard display
				543.200MHz		“Frequency/Name”
				ew100 G3
				P	MUTE
		AF
			B.Ch: 20.24			“Channel/Frequency”
			543.200MHz
			P		MUTE
	AF
				ew100 G3		“Channel/Name”
				B.Ch: 20.24
			P		MUTE
		AF

24