Sennheiser 100 G3 SK 100 and SKM

Specifications

In compliance with (EM)

Europe:

USA:

Approved by

Canada:

Mains unit*

Input voltage

Power/current consumption Output voltage Secondary output current Temperature range

*depending on country variant

In compliance with

Europe:

USA:

Canada:

Certified by cCSAus KL, 60065, CSA.

	EMC	EN 301489-1/-9
	Radio	EN 300422-1/-2
	Safety	EN 60065
	47 CFR 15 subpart B
Industry Canada		RSS 210,	IC: 2099A-G3EM100
	NT 2–1		NT 2–3
110 V~ or 230 V~,		100 to 240 V~,
	50/60 Hz		50/60 Hz
	9 VA		max. 120 mA
	13 V		12 V
	300 mA		400 mA
	–10 °C to +40 °C		–10 °C to +40 °C

EMC	NT 2-3: EN 55022, EN 55024,
	EN 55014-1/-2
	NT 2-1: EN 55013, EN 55020,
	EN 55014-1/-2
Safety	EN 60065

47 CFR 15 subpart B

ICES 003

For accessories and information on connector assignment, visit the ew G3 product page at www.sennheiser.com.

SK 100 and SKM 100

RF characteristics

Modulation	wideband FM
Frequency ranges	516–558, 566–608, 626–668, 734–776,
		780–822, 823–865 MHz (A to E, G, see page 4)
Transmission frequencies
		1,680 frequencies, tuneable in steps of 25 kHz
		20 frequency banks, each with up to 12 factory-
		preset channels, intermodulation-free
		1 frequency bank with up to 12 user programmable
		channels
Switching bandwidth
		42 MHz
Nominal/peak deviation
		±24 kHz / ±48 kHz
Frequency stability
		≤±15 ppm
RF output power at 50 Ω
		typ. 30 mW
Pilot tone squelch
		can be switched off

32